in cans make a great lamps for the kitchen.

What You'll Need:

8 13 oz. cans
1 long 20 oz. can
1 light kit
Puncturing tool- hammer and screwdriver
Electrical tape
Hot Glue Gun

Directions:

1. Clean all cans and remove bottom an tops except for the long can, remove one side and leave one side intact.
2. Puncture the top of the can with your hammer and screwdriver by hammering the scredriver into the lid of the can right in the middle. Widen the hole to let the cord through then close up again, be careful with the sharp metal pieces.
3. Pull cord through so the light is hanging down inside the can. Repair the hole with the
4. Hot Glue the first five cans aligned with the top of the long can. Stack the next three on top of the first five and the long can and hot glue together. Note: Use a low-wattage light bulb or the cans may fall off from the heat.